Convert waste plastic to oil

Convert waste plastic to oil

Over ten years production and operation experience must be help you out about how to dispose waste ( such as waste tyre,

waste rubber products,waste plastic ,waste oil sludge,etc.)

Pyrolysis process of waste plastic to oil

1,Feeding material,requires 1-2 hours,tire size less than 1.4meter can feed into reactor directly,bigger tire needs cutting first

,plastic can use auto feeder or Conveyor Belt to feed.

2, Heating ,needs 6-8 hours or so,as usual when reactor temperature reach up 180 degree,oil gas will start come out,when

temperature reach to 240 degree to 260 degree,a large amount of oil gas will come out.

3, Cooling, oil gas will go through cooling system,after cooling will become fuel oil.

4,Waste gas recycled,during the processing,except oil gas,there will be partly combustible but can not cooled gas,we called

waste gas,which can return to furnace for heating reactor so that can save fuel material.

5, Carbon black and steel wire,in the end of processing,oil gas come out all,need discharge slag which contain carbon black

and steel wire.

Specifications of waste plastic to oil

NO.	Raw materiaMol	Note
1	LN-2200*6600	5-6 TONS
2	LN-2600*6600	7-8 TONS
3	LN-2800*6600	10TONS
4	LN-2800*7200	12TONS
More specifications can make customized.

Advantages of waste plastic to oil

Reactor:

1. The gear can be seperated from reactor, instead of welding on reactor. So it will not be destroyed by cycling heating.

and very easily to be re-placed

2. The reactor is supported in a centre line by rollers. It will remain stable while running.

3. Auto-welding, both inside and outside.

4. Made by special boiler plate Q245R/ Q345R. Security and long service life.

5. Made by rock wool insulation board. Save fuel and ensure heating effect.

6.Reactor for waste plastic recycling machine to oil add extra bigger locating ring.

Cooling system of waste plastic to oil:

1. Coil pipe cooling system : there are 22-30 pipes lied in the water pond,each pipe 6 meters long, oil gas can be cooled in

larger area and longer time,thus get higher oil yield .

2. Vertical condensrs : we supply 4 cndensors, each has 44 pipes inside the condensors. Save land and

looks more neat and beautiful.

Anti-back fire device:

1. Little residual gas can not be cooled. It will recycle these gas to furnace burned to heat the reactor.

2. Water sealing disign will prevent tempering. Ensure safety.

Final products of waste plastic to oil

More information about waste plastic to oil ,please freely contact with us.

Contact us if you need more details on Waste Plastic to Fuel Oil. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Plastic to Oil、Plastic to Fuel Oil. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Waste Plastic Pyrolysis Machine > Waste Plastic Pyrolysis Plant